Most dimmer callbacks boil down to three problems: the wrong phase-cut type, incorrect load, or a dimmer spec'd for incandescent use pressed into LED service. This guide covers how to...
The complete specification guide to extra-low voltage LED lighting for Australian electrical contractors and commercial specifiers. Covers ELV compliance under AS/NZS 3000, driver selection, DALI, CBUS, and Diginet dimming compatibility,...
The fast answer: a 60W old bulb is replaced by a 6.5W LED producing 806 lumens, and a 100W old bulb by an 11W LED producing 1,521 lumens. This guide...
