Enjoy free fast shipping on orders over €250*

30 Days Returns Policy No Quibble Guarantee

Buyers Beware: String Lights You Just Bought Might Not be SAA Certified

String Lights You Just Bought Might Not be SAA Certified

When you spend money on something, you expect to receive exactly what you were promised. As a buyer, that is not asking for a lot. However, many a time retailers break a customer’s trust by selling them a sub-standard item after promising them a certified product. Sadly, this is seen far too often with festoon string lights. Many Australian retailers claim their festoon string lights have an SAA certificate for IP44 or IP65, but in truth they sell products that do not meet the SAA certification requirements. In short, they sell poor-quality festoon lights because they are cheaper. To earn a few extra bucks, they are willing to put you and your family at risk.

We want to put an end to such shoddy practices. Through this detailed blog post, we want to empower customers so that they get their money’s worth every time they buy festoon string lights and can sleep easy knowing that the product is 100% safe.

In this post, you will learn:

  • How many Australian retailers are misleading customers by selling them festoon string
  • How you can ensure the festoon string lights you are buying are indeed SAA certified?
  • What is SAA certification and why it is important? What are IP44 and IP65 ratings and the dangers of buying a sub-standard festoon string lights

 

Key Takeaways:

·         Many Australian retailers sell low-quality festoon lights (passing them as SAA certified for IP44 or IP65 ratings when that is not the case)

·         Just because a retailer claims their products are SAA certified doesn’t mean that is so. Customers must check whether the festoon lights they are buying are indeed SAA certified for IP44 or IP65

·         As per Australian Standards, only 1.5mm rubber cable is suitable for outdoor use. If the cable is made of PVC, or if the thickness is less than 1.5mm, the string lights do not meet SAA requirements (no matter what the retailer claims)

·         Downgraded festoon lights are a health hazard, so should be avoided

 

How Many Australian Retailers are Misleading Customers?

Before we get to the meat of the topic — how retailers are misleading customers — it is important to give a basic explanation of three technical terms: SAA, IP44, and IP65.

SAA Certification – All electronic products sold in Australia (and New Zealand) should have SAA certificate. Think of the SAA is a seal of quality. It is a proof that the product you are buying meets the Australian (and New Zealand) standards for electrical requirements and is electrically safe. Since string lights are electrical products, any string light sold in Australia and New Zealand must be SAA certificate. It is illegal to sell string lights that do not have SAA certification in Australia (and New Zealand). Festoon string lights that are not SAA certified are made of poor materials and can put you and your family at risk. Avoid them at all costs.

IP44 and IP65 – Without going into technical mumbo-jumbo, it is suffice to say that IP rating is a numerical value that is assigned to an electrical device — like festoon lights — to indicate how resistant they are to solids and water. The higher the number, the better the protection. When it comes to resistance to solid particles, both IP44 and IP65 are equal. But IP65 is better than IP44 when it comes to waterproofing protection. Both IP44 and IP65 string lights are approved for outdoor use in Australia.

The average buyer needs to remember only these three things (and nothing more) in regards to festoon lights and SAA certification for IP44 and IP65:

  1. Only SAA certified festoon lights can be legally sold in Australia (and New Zealand)
  2. Both IP44 and IP65 certified festoon lights are 100% safe for outdoor use. Since IP65 has a comparatively higher waterproofing rating, it is more suitable than IP44 for an area that is exposed to elements. But if you want outdoor lighting for a covered patio or porch, you can use either of them.
  3. Only festoon lights that have 1.5mm rubber cables are given the SAA certification. So, if the cable is made of PVC instead of rubber or its thickness is less than 1.5mm, it is not SAA certified (even if the retailer claims otherwise)

How many Australian retailers are duping unsuspecting customers?

To get the SAA certification, the manufacturer submits the correct product for testing — that is, string lights with 1.5mm rubber cables. Once the factory receives the SAA certification, retailers buy downgraded festoon lights — for example, 1.00mm PVC cables or 0.75 PVC cables — and then push their products as SAA-certified.

You might be wondering: How does a little compromise on cable’s thickness matter? Or what is such a big deal about buying PVC cables in place of rubber ones?

Oh, these things matters a lot. Using a downgraded product can put you and your loved ones at danger. We are sure you would never want that—right? 

Difference between 1.5mm and 1.00mm or 0.75mm cables

Thicker cables can carry more current, which basically means they deliver power more efficiently. To put things into perspective, a 1.5mm wire can carry 4 times more current than 0.75mm wire. If you use a thin cable, the risk of a fire is too high. So, it is important that you use only 1.55mm thick cables.

Difference between PVC and Rubber Cables

Rubber wires are of higher quality than PVC wires and as such are more suitable for outdoor use. Technically speaking, rubber has better heat resistance, bending resistance, and abrasion resistance than PVC.

·         To receive the SAA certification, festoon lights must have a 1.50mm rubber cable

·         Manufacturers submit the correct product for testing, but once they get the certification, retailers buy downgraded product (1.00mm PVC or 0.75mm PVC cables) and push them as SAA-certified

·         PVC is cheaper than rubber. Likewise, a thinner wire is cheaper than a thicker wire. To earn a greater profit, retailers sell substandard sting lights, which can be more prone to power surges and fire.

 

How can you ensure the string lights you are buying are indeed SAA approved?

The answer is simple: Do not accept things at face value. Check the product specifications to make sure that the cable is 1.5mm rubber.

  • If the cable is made of PVC instead of rubber, it does not meet SAA requirements (no matter what the retailer claims)
  • If the cable is less than 1.50mm thick (e.g. 1.0mm or 0.75mm), it does not meet SAA requirements

Another thing you can do is ask the retailer to show their SAA certification and check whether the certification applies to the string lights or not. The SAA certificate should also outline whether the string is connectable or not.

We have uploaded the screenshot of our SAA certification to show you what to look for.

  • Check whether the company’s name is correct or not (This is visible in the first screenshot attached below)
  • Check whether the SAA certificate applies to string lights or not (See the Product description in the second screenshot)

A retailer can have the SAA certification, but the certification may not apply to all the products it is selling. Having the SAA certification does not automatically guarantee that all of the products are SAA certified. For example, a retailer may have SAA certification for its LED bulbs but not for the cable used in festoon lights.

That is why it is important you verify whether the product you are buying is SAA certified or not.

·         Whenever you buy string lights, ensure the product description states the cable is 1.5mm rubber. If it is PVC or less than 1.5mm thick, it is not SAA-certified.

·         Check whether the SAA certification extends to string lights or not

Conclusion

All string lights sold in Australia (and New Zealand) should be SAA certified. But many retailers sell dodgy string lights with impudence, mainly because they know their customers are not educated on this subject and they can guilefully get away with it. When you buy festoon lights, check whether the cable is 1.5mm rubber. If it is made of PVC or if the thickness is less than 1.5mm, the lights do not meet the SAA requirements, regardless of what the retailer claims. Always use genuine SAA certified festoon lights because non-SAA products are of low-quality and using them can put you and your family at risk.

At LiquidLEDs, we walk the talk. All of our festoon lights are SAA certified. But hey, do not take our word for it; instead, check the product descriptions. We can also show you our SAA certification and that it applies to string lights (After all, the proof of pudding is in the eating!).

Buy only genuine electrical products and stay safe!